Contains: This product is not a toy. Keep out of reach of children. Keep all medication out of reach of children.

1. Insert Dosage Korc into medication bottle with a downward twisting motion until a tight seal is made between the bottle and the Dosage Korc. 2. Draw plunger back to the desired level of medication marking on the barrel of the syringe. Note: If bottle is over 90% full, skip this step. 3. Open Dosage Korc cover an insert tip of syringe firmly into opening in the Dosage Korc with a twisting, downward motion. 4. Push plunger down completely, forcing air into the bottle. If plunger sticks, moisten tip with vegetable oil. Note: If bottle is over 90% full, skip this step. 5. With the Syringe, Dosage Korc, and bottle attached, turn the entire until upside down in the manner shown in the illustration, step 5. 6. Withdraw medication into syringe by pulling out plunger. Withdraw slightly more medication into the syringe by pulling out plunger. Withdraw slightly more medication into the syringe than doctor's directions indicate, and then push plunger upward until the desired level of medication is contained in the syringe. Excess medication will be forced back into the bottle along with any air bubbles that may cause an inaccurate reading of the medication level. 7. Return the entire unit to the upright position and remove the syringe from the Dosage Korc with a slow, upward twisting motion. 8. Place tip of syringe past the patient's (child, adult or geriatric) lips and teeth. Slowly press plunger down to dispense medication into patient's mouth. You will note there is a small residual amount of medication within the tip which has not been calculated in the volume you are delivering. This amount is not part of your dosage. 9. Remove Dosage Korc and replace with original bottle cap. Failure to remove the Dosage Korc may affect the stability of the medication. To Clean: Wash before initial use. Wash syringe and Dosage Korc with warm, soapy water between uses and use a cleaning brush to remove any residue.